Anytime Tools 7 pc 1/2" TORQUE Extension Stick (Bar) w/Case Wide Range Product Description:
- Prevent damage to LUG NUTS and ALLOY WHEELS.
- This set includes a wide range of torque settings (55 - 175 ft lb)
- 55 ft.lb.(75 Nm) (Red) 65 ft.lb.(90 Nm) (Yellow) 80 ft.lb.(110 Nm) (Green) 100 ft.lb.(135 Nm) (Blue)
- 120 ft.lb.(160 Nm) (White) 140 ft.lb.(190 Nm) (Black) 175 ft.lb.(240 Nm) (Orange)
- Professional grade chrome molybdenum construction 1/2" square drive length 7-7/8"
Product Description
Prevent damage to LUG NUTS and ALLOY WHEELS. Use the right PROFESSIONAL tool! Prevent over tightening of wheel lug nuts! Won?t break studs or damage alloy wheels. Color- and letter-coded for quick reference. Use with any 1/2" impact wrench, even those with an extended anvil. This set includes a wide range of torque settings (55 - 175 ft lb)
Customer Reviews
Most helpful customer reviews
6 of 6 people found the following review helpful.
Great tool; makes life easier and saves time
By Michael R.
Does exactly what you hope for, turned my Ingersoll Rand impact wrench into a torque wrench. It is not delicate like using a real torque wrench but when spinning wheels off and on, it works great and is much quicker without risking stretching the wheel studs.The case is a nice touch and keeps the set organized.
6 of 6 people found the following review helpful.Well made
By Chris
If you use an impact wrench and need to limit torque these are a great idea. The shaft twists under impact and then springs back, this limits the torque applied to the socket. These are essential if you are in the habit of using an air wrench to put wheel nuts on, without one the 500ft.lbs my wrench can generate is enough to crack alloy wheels. These are well made and tight fitting, I checked the torque the first few times I used them and it was very close to the expected value, the 2-3 ft.lb error could be in my torque wrench. The powder coating is well applied and the case is solid.
5 of 5 people found the following review helpful.Good Quality
By Theodore F. Vahl
This is an excellent buy for the price. I can't tell any difference between these and another set that I have used that was a lot more expensive. If the dimensions are correct, what can go wrong since the modulus of elasticity is one of nature's most constant coefficients. People will complain of the overall accuracy of this type of device but they neglect the fact that screw torque/resultant fastener tension is subject to many variables, such as (but not limited to) corrosion, wear, burrs, and lubricants. These spring devices do a good job of keeping the bolt tension in the range where the wheel won't fall off, you can still get it off with the factory supplied "L" wrenches, and you haven't distorted the hub or disk. Don't forget that unless you have calibration equipment, keeping a "click type" torque wrench accurate is a real challenge. Remember that the torque applied is still a function of the impact wrench and air pressure you are using. Check this against one of old, cantilever lever, torque wrenches which maintain their accuracy as long as you start with the pointer on zero when no torque is applied.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!