Buy CURT Manufacturing 113383 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and ClipCURT Manufacturing 113383 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip Product Description:
- 1.25 In. receiver tube opening
- Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
- Never exceed vehicle weight rating
- Old-style ball mount, pin and clip included
- Made in USA. Limited lifetime warranty to original purchaser
Product Description
CURT Manufacturing focuses on being first-to-market with our new custom fit hitch designs. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish leaving an attractive high-gloss, smooth surface. You will have no worries about your product rusting, as CURT features WeatherTite™ construction which seals the main body of the hitch. All CURT hitches come with mounting hardware and easy to follow installation instructions. Our class 1 hitches have a 1 1/4 In. receiver opening, and rate up to 2,000 Lbs. gross trailer weight (GTW) and 200 Lbs. tongue weight (TW). This Trailer Hitch includes a standard CURT ball mount with a pin and clip. We're so confident in the quality of our trailer hitches that we back them up with a limited lifetime warranty and a one year finish warranty.
Customer Reviews
Most helpful customer reviews
3 of 3 people found the following review helpful.
Curt Class I receiver
By Robert Mann
This is the second Class I receiver I have mounted on one of my vehicles. This one was the easiest of the two. You do have to fish a bolt and washer through a frame member to get the bolt to protrude through a hole, but it wasn't as hard as it seemed it would be.The only real trick is tightening the two horizontal bolts. You need a really long ratchet extension to reach these nuts.
2 of 2 people found the following review helpful.
Excellent fit, sturdy hitch receiver
By ASC
Very well executed, sturdy hitch receiver, fits perfect, and barely noticed when installed. Installation does not required excessive skills, time or tools. It took me about 1.5 hours to complete the job in a garage without ramp or pit. Fishing for bolt and washer was much easier, than I have expected and was actually fun. As somebody mentioned before, tightening the two horizontal bolts is most time consuming - the space is limited there, so you have tight by really small steps. Unlike cheaper analog - Reese Towpower 77150 Insta-Hitch Class I Hitch Receiver - this Curt hitch opening takes any class I and II hitch mounts from any manufacturers. I have returned Reese Towpower 77150 Insta-Hitch Class I Hitch Receiver back to amazon because it did not accept non-Reese equipment.
2 of 2 people found the following review helpful.Does the job
By Steven J. Tirone
Clearly well-made: solid, nice clean welds.Went on easy, one-man job. One glitch: two of the bolts were a 1/2 inch short, had to go to Lowe's to get longer ones, but they were readily available. Added a half-hour to a 45 minute job, and $1.40 to the cost. You will need to widen frame holes, so have the proper metal drill bits ready.Fits my Mazda 5 neatly and solidly.Used it to tow a power log splitter the very next day.Very satisfied.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
Content Costs Extra
Paslode, not what it use to be
