Buy PAC Chrysler Can Bus Radio Repl/ChimePAC Chrysler Can Bus Radio Repl/Chime Product Description:
- Works on radio models REF, REC, RAQ, and RAK
- Factory amplifier will also be able to be used
- Allows for easy connection of an aftermarket radio or navigation system
- Provides a +12volt accessory wire
- WIRE your new aftermarket radio to the harness just like you would in a standard install.
Product Description
The PAC C2R-CHY is a radio replacement module interface for many 2004+Chrysler, DODGE and Jeep vehicles with Factory Radio models REF, REC, RAQ or RAK.It allows for easy connection of an aftermarket radio or navigation system tomany vehicles. The interface provides 12 volt accessory output, Reverse signal,Park light Signal, Vehicle Speed Signal (VSS) and Parking brake output. TheC2R-CHY auto detects the factory amplifier in the vehicle and turns it on viathe C2R-CHY's remote input wire (if equipped).This product also can be interfaced with a SWI-CAN interface and either theSWI-X, SWI-ALP or SWI-PS or SWI-ECL to use the steering wheel controls of yournew car with your new radio. Please note: You need BOTH a SWI-CAN and a SWI-X,SWI-ALP, SWI-PS or SWI-ECL. Works and allows you to use the factory amplifier(Boston Acoustic System). The factory amp accepts 2 channel audio only. Theamplifier fading is controlled by data communication from the factory radio.Therefore the aftermarket radio will not have the capability to control theamplifier. Please connect the front outputs of the aftermarket radio to the rearinputs of the 22 pin connector. This will allow the navigation unit voiceprompts to be heard. The rear speaker outputs of the radio are not used. Thefactory amplifier balance and fader is set to center by the interface. Features:Works on radio models REF, REC, RAQ, and RAKFactory amplifier will also be able to be usedAllows for easy connection of an aftermarket radio or navigation systemProvides a +12volt accessory wireWIRE your new aftermarket radio to the harness just like you would in astandard install.Comes with installation instructions.NOTE: If you do not see your vehicle listed below, call PACTechnical Support at (800) 854-3133 to find out which PAC product is rightfor your vehicle.Compatibility List:2004 Dodge Durango2005-2006 Dodge M NOTE: This product description has been cutt-off (is not complete) due to the size limit of Amazon.com's description field.
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Worked Perfectly
By William J. Bauer
I just installed a Pioneer Avic-D3 navigation system in my 2005 Jeep Grand Cherokee with this unit and it's worth every penny.All newer Dodge/Jeep/Chrysler vehicles use the "canbus" system. It saves them time and money by connecting electrical components through the computer. Without this adapter you will have a very hard time installing anything non-factory. With it all you do is follow the wiring diagram to connect your new stereo unit to the adapter, plug it into the factory harness and you are done.It even includes the vehicle speed sensor, parking brake sensor, parking light sensor, reverse gear indicator, etc. - All thing you would struggle to find around the car brought to you in one simple harness. If you are putting in a navigation system, you would be insane to not buy this thing.NOTE: If your car has a factory amplifier you have to wire the front speakers from the new unit to the rear speakers in the factory harness, or else your navigation system commands won't be audible. ALSO use the harness ground, do not try to ground to the chassis - remember everything runs through the computer....
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
