Buy CURT Manufacturing 114303 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and ClipCURT Manufacturing 114303 Class 1 Trailer Hitch with Old-Style Ball Mount, Pin and Clip Product Description:
- 1.25 In. receiver tube opening
- Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
- Never exceed vehicle weight rating
- Old-style ball mount, pin and clip included
- Made in USA. Limited lifetime warranty to original purchaser
Product Description
CURT Manufacturing focuses on being first-to-market with our new custom fit hitch designs. CURT is the only hitch company in the industry that mechanically de-scales all of our hitches before applying a thick powder coat finish leaving an attractive high-gloss, smooth surface. You will have no worries about your product rusting, as CURT features WeatherTite™ construction which seals the main body of the hitch. All CURT hitches come with mounting hardware and easy to follow installation instructions. Our class 1 hitches have a 1 1/4 In. receiver opening, and rate up to 2,000 Lbs. gross trailer weight (GTW) and 200 Lbs. tongue weight (TW). This Trailer Hitch includes a standard CURT ball mount with a pin and clip. We're so confident in the quality of our trailer hitches that we back them up with a limited lifetime warranty and a one year finish warranty.
Customer Reviews
Most helpful customer reviews
0 of 0 people found the following review helpful.
Heft at a low cost
By Damon McKernan
First off I'll just say, I put this on a Chevy Cobalt 2006 LT.I wanted a bike rack that didn't rest on the trunk, and a hitch was pretty much my only option.To do this I needed to drill some holes in my frame, so don't buy this if you don't have the tools or guts to permanently modify your vehicle.After getting the holes drilled, installation was a breeze, I hit ONE snag where one of the bolts was being blocked by the tire guard but I ended up installing the bolt in reverse which seemed to work (and has worked for the past 6 months).The hitch is sturdy! It doesn't rattle or shake or anything. It's also quite heavy so you don't need to worry about denting it.
0 of 0 people found the following review helpful.
20011 chevy Corbalt
By harley
This hitch was my secound Curt hitch.First one was for a 2006 Chevy hhr. Very eazy to install.The other hitch was for my 20011 Chevy Corbalt.Not as eazy to installas the hhr hitch but If I knew what know now this hitch would also be very eazy to install.I removed the trunh pan cover, spare tire & set the battery back away from where I would be drilling.The rear dam was held by rubber/plactic fasteners, these & trime off so the the dam would come off.Next I centered the hitch to the the bumper beam.When I moved the hitch position then I could not see where I had marked the center so, I then used the liesence holder center as a reference. This worked ok.It was hard to drill the 4 upper bolt holes as this beam is made of two thicknesses. A step drill might work good.The bolts drop down from the top & I taped them on to the spacers as it is hard to reach these bolts with your fingers. I plan to use some sealer on the inside of the trunk & bolts & washers where I removed the dam.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
